- Estimated Delivery Date : Friday September 29th 2023
- Shipping Charge From : $14.95
Polished Stainless steel is mostly known for its durability and shiny polished chrome-like appearance.
The material is very tough, so it will offer excellent protection for your door to prevent damage while demonstrating its radiant style.
We have two finishes of polished stainless steel kick plates to choose from:
Bright polished - this is highly reflective but has a slightly cloudy texture.
Mirror polished - This material is so highly polished it can be used as an unbreakable mirror.
We have two grades of the material to choose from, so we can be sure we will have something that perfectly matches your needs:
Budget Grade 430 - Our entry-level grade is for internal applications only. A cost-effective solution where the aesthetic is more important than overall strength
Standard Grade 304 - Can be used inside or outside. It offers a great deal of strength and rust prevention.
As with all our kicking plates, we take extra care to smooth the edges of the plate to eliminate the possibility of sharp edges.
Bright Polished This finish is highly reflective with a slightly cloudy texture. Similar to Polished Chrome.
This finish is so highly polished that it can be used as a mirror.
Standard-duty is our most commonly used thickness; it is typically the go-to choice for domestic doors and office buildings. Standard duty kick plates offer a great deal of protection while benefiting from good aesthetics. It is suitable for locations with moderate usage.
Heavy-duty kick plates must be installed where additional strength may be required—often used in locations with a greater footfall like public buildings, hospitals, and restaurant kitchen doors. These plates will also offer a great deal of protection against impact from trucks and carts.
Our thickest sheets are often used when the strength and impact resistance of the door protection plate is crucial. Servicing areas like industrial warehouses where the level of impact could be high would call for the extra heavy-duty option.
Pre Drilled Holes (Screws included) With this option, our Kicking plates will come pre-drilled and countersunk with matching fixing screws. We use countersunk Philips head wood screws which will sit flat on the kick plate once fixed. The size of the screw is 5/8" x 6g
Self Adhesive(Back of kickplate)
Screw Fix and self adhesive(Back of kickplate)
Magnetic Tape(Back of kickplate)
- Square Corners
- Radius Corners
SHIPPING COSTSOur standard shipping charge for all orders is $9.95 with free standard delivery on orders over $150
We always try to ship orders as soon as possible. You can get an estimated delivery time on each product page.
Polished Stainless Steel
Routinely wipe the kickplate down with a soft cloth and warm soapy water. Try to avoid using an abrasive sponge, as this may result in scratching the kick plate and damaging the surface. Be sure to dry the kick plate after cleaning to avoid water spots emerging.
To finish off the cleaning process, you can also use a domestic glass cleaner on this item. Be sure to dry the kick plate after cleaning to avoid water spots emerging.
If the surface begins to age or tarnishes, you can apply a specialist metal polish such as 'Brasso,' which should rejuvenate the kick plate to its former glory.
Unfortunately, no stainless steel can guarantee against rust on the face; if this does happen, you should use a specialist stainless steel rust removal kit. These can be found at most good hardware stores.
Antibacterial coated kick plates.
As people around the world are reeling from the global Covid-19 pandemic, it’s essential to look for ways to reduce the spread of the virus and possible future viruses. At Kick Plate Direct, were doing our small part and addressing this concern head-on with the introduction of antimicrobial coating to our range of kick plates, which will now be available as an optional extra. This protective antibacterial coating fights viruses in public buildings, allowing you to operate safely with peace of mind.
The coating is a clear lacquer finish that is applied to the kick plates at the point of manufacture. The applied coating is barely visible on most materials, allowing the style of your kick plates to shine through. It prevents 99.9% of mold growth, bacteria, biofilm, and viruses for the entire lifetime of the product. Its efficacy has made it a favorite for industries around the world and is tested to the JIS Z 2801 and ISO 22196 international standards.
We recommend the antimicrobial coating be used in hospitals, care homes, public buildings, and schools – the places where safety and hygiene matter the most. We especially recommend the antibacterial coating be applied to push plates and pull handles, which are used by hands. Adding this treatment to kick plates will help fight against cases of flu, colds, and other viruses for years to come.How does it work?
The antimicrobial technology works by embedding silver ions in the material substrate. These ions destabilize the virus-cell, prevent it from replicating, and effectively kill it.
It is entirely safe and comprised of substances approved by the EPA, EFSA, and FDA. It does not include nano-silver, triclosan, or any other organic antimicrobial additives that have environmental concerns. The coating does not wear off, as it is completely incorporated into the kick plate material. It will remain active for the lifespan of the product. We can have the coating applied to any of our kick plates, and they can be installed in any location, both inside and outside.
If you have any further questions about Anti-bacterial coating to kicking plates, please don't hesitate to reach out to our friendly and helpful staff.