Search By
Category & Products

product-main
Fixing Options
Anodized Aluminum
Clear Section x
Clear Section x
$ 00.00

Discount Structure

$250 + = 10%
$500 + = 20%
$1000 + = 30%

Description

Aluminum kick plates are the most cost-effective material in our range.

Aluminum is an excellent choice of material for kicking plates as it is lightweight as well as durable. This makes it suitable to withstand moderate impact while adequately protecting your door. We use a high grade of commercial aluminum, which is very pure, meaning the plates can be used on interior or exterior doors. In addition to that, they're 100% recyclable, so they're good for the environment too!

The main feature of this product is the high-quality Anodized finish. Anodizing is done to protect the material from scratches on the face. The material boasts a fantastic resistance to atmospheric corrosion meaning your kick plates won't tarnish, rust, or discolor over time. The anodized surface provides a highly decorative and long-lasting, highly durable finish.

We have a wide range of anodized aluminum colors available, including brass and bronze finishes, which present a lower-cost alternative to solid brass and bronze products. And unlike many powder coated kick plates, the anodized color will not fade or crack over time.

We take extra care to smooth the edges of the kicking plates to eliminate the possibility of sharp edges.

Light-Duty

Our entry-level kick plates are predominantly for decorative purposes. Whist they will still offer some level of protection to the door, they can only be fitted on a door with a low volume of traffic.

Standard-Duty

Standard-duty is our most commonly used thickness; it is typically the go-to choice for domestic doors and office buildings. Standard duty kick plates offer a great deal of protection while benefiting from good aesthetics. It is suitable for locations with moderate usage.

Heavy-Duty

Heavy-duty kick plates must be installed where additional strength may be required—often used in locations with a greater footfall like public buildings, hospitals, and restaurant kitchen doors. These plates will also offer a great deal of protection against impact from trucks and carts.

Extra Heavy-Duty

Our thickest sheets are often used when the strength and impact resistance of the door protection plate is crucial. Servicing areas like industrial warehouses where the level of impact could be high would call for the extra heavy-duty option.

  • Pre Drilled Holes (Screws included) With this option, our Kicking plates will come pre-drilled and countersunk with matching fixing screws. We use countersunk Philips head wood screws which will sit flat on the kick plate once fixed. The size of the screw is 5/8" x 6g
  • Self Adhesive(Back of kickplate)
  • Screw Fix and self adhesive(Back of kickplate)
  • Magnetic Tape(Back of kickplate)
  • Square Corners
  • Radius Corners

SHIPPING COSTS

Our standard shipping charge for all orders is $14.95 with free standard delivery on orders over $150

DELIVERY TIMES 

We always try to ship orders as soon as possible. You can get an estimated delivery time on each product page. 

INTERNATIONAL ORDERS

Shipping costs and lead times for international orders Is priced upon application, please get in touch with our sales staff for your bespoke quotation.


Aluminum

Routinely wipe the kickplate down with a soft cloth and warm soapy water. Try to avoid using an abrasive sponge, as this may result in scratching the kick plate and damaging the surface. Be sure to dry the kick plate after cleaning to avoid water spots emerging.

Antibacterial coated kick plates.

As people around the world are reeling from the global Covid-19 pandemic, it’s essential to look for ways to reduce the spread of the virus and possible future viruses. At Kick Plate Direct, were doing our small part and addressing this concern head-on with the introduction of antimicrobial coating to our range of kick plates, which will now be available as an optional extra. This protective antibacterial coating fights viruses in public buildings, allowing you to operate safely with peace of mind.

The coating is a clear lacquer finish that is applied to the kick plates at the point of manufacture. The applied coating is barely visible on most materials, allowing the style of your kick plates to shine through. It prevents 99.9% of mold growth, bacteria, biofilm, and viruses for the entire lifetime of the product. Its efficacy has made it a favorite for industries around the world and is tested to the JIS Z 2801 and ISO 22196 international standards.

We recommend the antimicrobial coating be used in hospitals, care homes, public buildings, and schools – the places where safety and hygiene matter the most. We especially recommend the antibacterial coating be applied to push plates and pull handles, which are used by hands. Adding this treatment to kick plates will help fight against cases of flu, colds, and other viruses for years to come.

How does it work?

The antimicrobial technology works by embedding silver ions in the material substrate. These ions destabilize the virus-cell, prevent it from replicating, and effectively kill it.

It is entirely safe and comprised of substances approved by the EPA, EFSA, and FDA. It does not include nano-silver, triclosan, or any other organic antimicrobial additives that have environmental concerns. The coating does not wear off, as it is completely incorporated into the kick plate material. It will remain active for the lifespan of the product. We can have the coating applied to any of our kick plates, and they can be installed in any location, both inside and outside.

If you have any further questions about Anti-bacterial coating to kicking plates, please don't hesitate to reach out to our friendly and helpful staff.